 |  |  |  |  |  |
| MTL SPECIFICATONS |
 |
| |
 |
The Maximum Security Tray Loc (MTL) provides the highest level of security and versatility.
This device is designed to form fit the computer in order to entrap it inside a metal shell
protecting the computer against theft of internal components as well as the monitor.
An MTL is:
A Tray Lock, which is fabricated from two 16 gauge Cold Rolled Steel (CRS) plates that
interlock, slide together and is locked with a high security, five wafer, pick resistant screw lock.
A 16 gauge CRS shell with reinforced welded flanges to prevent the computer from being
removed from the rear is bolted to the Tray Lock. In the event the computer is replaced with a
unit that has a larger or smaller case, you can simply adjust the size of the shell with our
adjustable MTL. If a fixed MTL is in use, only the shell itself would need to be replaced, not the
entire device. Attached to the top plate is an 11 gauge CRS 'L' bar that traps the computer at the
front.
An MTL can be locked down to the work surface either by bolting with a 1/2" diameter carriage
bolt or can be adhered to the work surface with high bonding 1/8" thick adhesive tape that
covers at least 80% of the bottom of the device. The adhesive can also be applied to a
separate plate and then attached to the MTL allowing it to be reused as a bolting unit in another
location without the purchase of additional parts.
Monitors may be bolted directly to the top of the MTL and/or can be secured with an optional
3/16" steel security cable kit made from aircraft cable.
An MTL can be secured to the top, side or underneath area of a desk or table. It can also be
mounted to any solid, flat surface your application requires.
Available for any size desktop or tower computer. We can also custom make an
MTL to secure unique applications.
This device is designed to form fit the computer in order to entrap it inside a metal shell
protecting the computer against theft of internal components as well as the monitor.
An MTL is:
A Tray Lock, which is fabricated from two 16 gauge Cold Rolled Steel (CRS) plates that
interlock, slide together and is locked with a high security, five wafer, pick resistant screw lock.
A 16 gauge CRS shell with reinforced welded flanges to prevent the computer from being
removed from the rear is bolted to the Tray Lock. In the event the computer is replaced with a
unit that has a larger or smaller case, you can simply adjust the size of the shell with our
adjustable MTL. If a fixed MTL is in use, only the shell itself would need to be replaced, not the
entire device. Attached to the top plate is an 11 gauge CRS 'L' bar that traps the computer at the
front.
An MTL can be locked down to the work surface either by bolting with a 1/2" diameter carriage
bolt or can be adhered to the work surface with high bonding 1/8" thick adhesive tape that
covers at least 80% of the bottom of the device. The adhesive can also be applied to a
separate plate and then attached to the MTL allowing it to be reused as a bolting unit in another
location without the purchase of additional parts.
Monitors may be bolted directly to the top of the MTL and/or can be secured with an optional
3/16" steel security cable kit made from aircraft cable.
An MTL can be secured to the top, side or underneath area of a desk or table. It can also be
mounted to any solid, flat surface your application requires.
Available for any size desktop or tower computer. We can also custom make an
MTL to secure unique applications.
BMS MICHIGAN 2003